Enware Australia EL485 handheld eyewash and body spray
14 January, 2010 byThe EL485 handheld eyewash and body spray provides quick response to hazard spills, featuring dual outlets with stay-open ball valve activation that allows for hands-free flushing of eyes in industrial, commercial and educational applications.
Mid-size rider sweeper
12 November, 2009 byThe S20 Compact Mid-Size Rider Sweeper is an easy-to-use and compact rider sweeper that offers improvements over the unit it replaces in air quality and safety.
Rapid response chemical safety kit
12 November, 2009 byThe FAST-ACT (First Applied Sorbent Treatment - Against Chemical Threats) rapid response safety kit offers one-step neutralisation of either liquid or vapour spills of highly toxic chemicals including hydrofluoric (HF) acid.
Flue gas analyser
12 November, 2009 byThe Panametrics OxyTrak 390 flue gas analyser measures unburned oxygen levels in dirty, aggressive combustion applications and uses information to adjust burner air supply for maximum combustion efficiency and safety.
IBC bulk container bund
12 November, 2009 byThe DB1150 bulk container bund joins the DB4 (4 Drum Bund) and DB2 (2 Drum Bund) range of Global Spill Control portable spill control products.
Flood pumps
12 November, 2009 byThe Hytrans Flood Pump is a high-volume pump that can assist communities and industries recover from floods through its ability to dewater an area at a maximum rate of 20,000 L/min.
Inflatable pipe stoppers
23 September, 2009 byThe range of re-usable Pronal inflatable elastomer pipe stoppers has been expanded to span pipes from 45-2115 mm diameter in stock sizes and up to 3000 mm for customised types. The stoppers are typically used to carry out sealing tests and maintenance work on municipal and industrial water and wastewater pipelines and to prevent accidental pollution such as spilling of toxic substances, thus preventing the flow of toxic fluids into drainage networks or the surrounding environment.
Protective bellows
23 September, 2009 byProtective bellows prolong the life of machinery and protect the people who operate them from personal damage. They are designed and manufactured to enhance productivity and reduce workplace hazards by shielding employees and their environment from machine-generated debris.
Spill response kits
23 September, 2009 byThe Dangerous Goods Spill Response Kit is an important element of any emergency response plan and a vital element in complying with environmental duty of care.
Spill and flood containment
18 September, 2009 byAqua-Sac is a self-inflating, sand-less sandbag that consists of a sturdy jute sack containing a super-absorbent polymer (SAP), which is retained inside a finely woven inner cotton bag. Soaked in fresh water in a tub or sink, the device inflates in 3-5 minutes to 30 times its original size.
Workshop spill kit
07 August, 2009 byThe TSSWKS spill kit is designed to handle spills of oils, fuels, solvents, coolant and general chemicals typically used in workshops.
Builder fined over asbestos contamination
06 August, 2009A South Australian builder was convicted and fined for putting people at risk by failing to adequately and legally remove asbestos from a worksite.
General-purpose absorbent
09 June, 2009 bySukerup organic absorbent is 100% organic and contains no chemical residues. It is made from ground coconut husk milled to a particle size that allows maximum absorption.
Sanitising mat
09 June, 2009 byThe Sanitising Foot Bath Mat is designed to keep hygienic areas free of contamination and germs.
Automatic scrubber dryer
09 June, 2009 byThe T2 walk-behind battery-operated automatic scrubber-dryer cleans and dries small congested spaces in one pass to increase cleanliness and environmental safety.
