Cirprotec lightning, surge and overvoltage protection
28 September, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Cirprotec range of lightning, surge and overvoltage protection products includes DIN-style surge diverters, high-capacity (kA) surge diverters for incoming main switchboards and data and communication surge diverters for I/O and control applications.
DEHN + SOHNE Blitzductor XT pluggable surge arrester
28 September, 2010 | Supplied by: DEHN + SOHNE GmbH + Co KG
The Blitzductor XT pluggable combined lightning current and surge arrester is designed for four signal wires and features three arrester modules that protect Dupline Bus devices with protective diode circuits at the input and bus systems in Ex zone 1.
Satellite phone performance
22 September, 2010
Frost & Sullivan has conducted a study of the differences between satellite phone devices and services and has detailed this in a report.
Company pleads guilty to fatal insulation installation safety breach
15 September, 2010
A Rockhampton company pleaded guilty in the Rockhampton Industrial Magistrates Court over the death of a teenage insulation installer in the ceiling of a home in 2009.
Employers warned to identify hazards to NZ workers
20 August, 2010
The importance of effective hazard identification and electrical isolation were stressed recently by New Zealand’s Department of Labour, following the prosecution of a company over an injury at a quarry.
Test Sockets in Seconds training video for InstalTest Combo tester
23 July, 2010 | Supplied by: Emona Instruments Pty Ltd
The training video, Test Sockets in Seconds, for the InstalTest Combo multifunction electrical installation tester shows electrical contractors how to test sockets in seconds without cumbersome trailing leads.
Megger DLRO 10 digital micro-ohmmeter
23 July, 2010 | Supplied by: TechRentals
Available to rent, the Megger DLRO 10 digital micro-ohmmeter is used for low resistance measurement. It is fully automatic, selecting the most suitable test current up to 10 ADC to measure resistance from 0.1 µΩ to 2000 Ω, on one of seven ranges.
Efficient and safe access to electricity networks
16 July, 2010
The NSW Government announced changes to cut red tape for service providers to provide electrical services to industry, without compromising stringent safety criteria.
The Simpsons workplace safety posters
02 June, 2010 | Supplied by: Work Safety Solutions
The Simpsons workplace safety posters, featuring characters from the TV series, are designed to reduce workplace injuries. The characters illustrate ways to work safely using their unique brand of humour.
Project engraving, lasers and digital print and die-cutting equipment
02 June, 2010 | Supplied by: Project Engraving & Digital
The Project range of engraving, lasers and digital print and die-cutting equipment gives users in-house signage capabilities and includes the entry-level Roland EGX30 engraver through to Epilog lasers systems.
Charges laid over electrocution of insulation installer
10 May, 2010
Charges have been laid against a Queensland insulation installation company and its management personnel over an electrocution death that occurred late last year.
NEC H2640 thermal imaging radiometric camera
22 March, 2010 | Supplied by: Infratherm Pty Ltd
NEC has released the H2640 thermal imaging radiometric camera with a temperature resolution of 0.03°. The uncooled 640 x 480 focal plane array detector delivers 0.6 mrad instantaneous field of view with the standard 22° (H) x 16° (V) lens.
CrispTech Mack Electrical MRR series RCBOs
18 March, 2010 | Supplied by: CrispTech Pty Ltd
The Mack Electrical MRR series of residual current circuit breakers with overcurrent protection (RCBOs) has been expanded with two type ‘A’ units, each with the same frame size as a standard MCB.
HPM Extra Safe power points with rotating safety covers
18 March, 2010 | Supplied by: Legrand Australia P/L
Rotating, spring-loaded safety covers feature on HPM Extra Safe power points and remain firmly closed when not in use.
NHP Emergency Lighting Test Unit
18 March, 2010 | Supplied by: NHP Electrical Engineering Products Pty Ltd
The Emergency Lighting Test Unit has been redesigned to make testing emergency and exit lighting more time-efficient. Building codes require that emergency and exit lighting be inspected and tested every six months.