Scott Safety Protégé Multi-gas Monitor
20 September, 2011 byThe Protégé Multi-gas Monitor can be used for the detection of oxygen, combustibles, hydrogen sulphide and/or carbon monoxide in industrial and fire applications in Australia and New Zealand.
CAC Gas 5 L gas cylinder
15 September, 2011 byThe CAC Gas 5 L gas cylinder provides users with a gas capacity of up to 750 L.
CAC Gas & Instrumentation calibration gas finder
05 September, 2011The calibration gas finder allows customers to search through an extensive range of gases from simple hydrocarbons to high-purity gases. Multicomponent 2, 3, 4 or 5 gas mixtures and single gas corrosive and non-corrosive gas mixtures can be easily sourced. Customers searching for non-refillable (disposable) calibration gas cylinders will now be able to save time and quickly locate all gas mixture options that are available in 34, 60, 103 and 112 L cylinders.
CAC Gas BTS-HP bump test stations
03 August, 2011 byThe BTS-HP bump test stations are used with high-pressure/large-volume gas cylinders providing a cost-effective solution for bump testing/response testing gas detection instruments in the workplace.
Fluid International ST75 flow meter
28 July, 2011 byThe ST75 flowmeter from Fluid International delivers precision flow measurement while reducing the consumption of energy fuel gases, specialty gases and pneumatic air. It is suitable for refineries and natural gas pipelines, refrigeration and air conditioning, manufacturing plants, welding operations and large engine turbochargers.
CAC Gas ODFR-1001 on-demand flow regulator
13 July, 2011 byThe ODFR-1001 on-demand flow regulator can be used for gas calibration of built-in sample draw instruments or docking station applications with internal pumps.
CAC Gas Gas Calculator online tool
29 June, 2011 byThe Gas Calculator online tool easily calculates annual calibration and/or bump test gas consumption and can be used for all gas detection and gas analyser applications.
CAC Gas 103 L CO2 calibration gas cylinder for the beverage industry
14 June, 2011
by
The 103 L carbon dioxide (CO2) calibration gas cylinder has been designed for calibrating gas detection instruments in the winery, beer and other beverage industry applications.
Land Instruments Lancom 4 portable flue gas analyser
10 June, 2011 byLand Instruments has introduced a compact portable flue gas analyser, Lancom 4, which can monitor up to nine different gases and 17 measurement parameters.
CAC-BTS Series bump testing stations
02 June, 2011The CAC-BTS Series wall-mounted bump testing stations are designed to simplify the process of gas testing instruments.
Industrial Scientific Mobile Perimeter System IV mobile gas monitor
25 May, 2011 byMobile Perimeter System (MPS) IV is a mobile gas monitoring platform suitable for temporary or remote gas detection applications. It is solar powered, has onboard strobe and siren, and can be configured with wireless communication.
Industrial Scientific Ventis MX4 multigas detector
25 May, 2011 byVentis MX4 multigas detector is a lightweight, highly configurable instrument that is available with or without an integral pump. It is compatible with iNet, Industrial Scientific’s software-based service that increases safety by providing visibility into gas detector alarms, exposure and usage.
CAC Gas FF-100 fixed-flow regulator
17 May, 2011 byThe FF-100 fixed-flow regulator can be used for calibration gas applications which require a constant flow for calibrating gas detection instruments and gas analysers.
A 'close shave' in New Zealand - confined spaces and CO2
04 May, 2011BPO Ltd of Hamilton, New Zealand, environmental consultants, purchased a confined space harness, rig and gas detector back in 2001 because it was a requirement of one of their clients. The company undertook confined space training to the AS/NZS standards for the same reason. BPO saw the equipment and procedures more as a competitive edge rather than as a necessity and, for this reason, always followed the procedures and used the equipment. The equipment was always looked after and inspection certificates were kept current. At the time, many companies regarded the whole confined space thing as a bit of an overreaction to the Aquatec disaster in Auckland.
Choosing the right PID for your applications
04 May, 2011The following article gives guidelines for choosing the right PID for particular applications.
