Dyson Airblade hand dryer range

Developed by a team of 125 Dyson engineers, three Airblade hand dryers are fast, hygienic and are a sustainable way to dry hands properly.

The Airblade Tap hand dryer washes and dries hands in one place - no need to leave the sink; the Airblade V hand dryer has concentrated technology, 60% smaller with the same performance as larger dryers; a re-engineered Airblade hand dryer had 2.5 kg of materials removed and has a small carbon footprint.

Conventional hand dryers use one column of bacteria-filled bathroom air to evaporate water from hands, after much hand rubbing.

The Airblade dryer technology provides sheets of high-velocity unheated air travel through tiny apertures quickly scraping water from hands like a windscreen wiper, leaving them dry.

The digital motor is a power dense brushless DC motor, using a bonded magnet encased in a carbon fibre sleeve. It is a small and fully integrated 1600 W motor. Using digital pulse technology, it accelerates from 0-90,000 rpm in less than 0.7 s.

The hand dryer passes washroom air through a HEPA filter to remove 99.9% of bacteria before it’s blown onto hands.

The Airblade Tap hand dryer has infrared sensors that pinpoint hand positions and release water from the tap stem. Once hands are wet and drying is requested, integrated circuitry computes the information and activates the digital motor, creating two high-velocity sheets of air on the tap’s branches. Unheated clean air is released to scrape water off hands, leaving them dry quickly.

The Airblade V hand dryer has two sheets of high-velocity air angled at 115° which span the width of each hand and scrape off water.

The Airblade mk2 hand dryer has improved acoustics and lower carbon emissions. It is HACCP[1] approved for hygiene, so it is safe for use in the food and beverage industry.