Construction helmet to protect workers from CO poisoning
Carbon monoxide poisoning is a significant problem for construction workers in both residential and industrial settings. The danger exists because the exhaust from petrol-powered hand tools can quickly build up in enclosed spaces and easily overcome the tool’s users and nearby co-workers.
Research into a wearable computing system installed in a helmet to protect construction workers from carbon monoxide poisoning has garnered the Virginia Tech investigators a Best Paper Award from a prestigious scientific and engineering community. The award will be presented at the Institute of Electrical and Electronic Engineers (IEEE) Conference on Automation Science and Engineering being held 17-21 August 2013.
In the paper, the researchers explained how they integrated a pulse oximetry sensor into a typical construction helmet to allow continuous and non-invasive monitoring of workers’ blood gas saturation levels. The results of their study showed that a user of this helmet would be warned of impending carbon monoxide poisoning with a probability of greater than 99%.
The award-winning research and resulting paper was written by Jason B Forsyth, of Durham, N.C., and a PhD candidate in computer engineering, his adviser Thomas L Martin, professor of electrical and computer engineering, Deborah Young-Corbett, assistant professor of civil and environmental engineering and a member of the Myers-Lawson School of Construction, and Ed Dorsa, associate professor of industrial design.
The paper, Feasibility of intelligent monitoring of construction workers for carbon monoxide poisoning, was the focus of Forsyth’s master’s thesis, and Martin, Young-Corbett and Dorsa were all members of his graduate committee.
Ten Virginia Tech students participated in the study conducted on the university campus. They mimicked simple tasks of construction workers.
To show the feasibility of monitoring for carbon monoxide poisoning without subjecting the users to dangerous conditions, the researchers used a prototype for monitoring the blood oxygen saturation. The difference for monitoring for oxygen and for carbon monoxide differs only in the number of wavelengths of light employed, so if this monitoring proved feasible, then the monitoring for carbon monoxide would be feasible as well.
They selected a helmet for the installation of a wearable computer because they needed a design that could be worn year round, which ruled out seasonal clothing such as overalls or coats. They also wanted a design that was socially acceptable, and one that struck a balance between comfort, usability and feasibility.
“This helmet is only a first step toward our long-term vision of having a network of wearable and environmental sensors and intelligent personal protective gear on construction sites that will improve safety for workers,” according to their report. “While this helmet targets carbon monoxide poisoning, we believe there are compelling opportunities for wearable computing in reducing injuries due to falls, electrocution and particulate inhalation, as well as workers on foot being struck by vehicles.”
Martin is a past recipient of both the Presidential Early Career Award for Scientists and Engineers and the National Science Foundation CAREER Award, both furthering his research in the design of electronic textiles and ‘smart’ clothes.
Young-Corbett is working in a new field of engineering known as Prevention through Design or PtD. This optimal method of preventing occupational illnesses, injuries and fatalities is to ‘design out’ the hazards and risks, thereby eliminating the need to control them during work operations. She is also the associate director of the Center for Innovation in Construction Safety and Health Research of the Institute of Critical Technology and Applied Science at Virginia Tech.
Dorsa has a National Science Foundation funded studio in interdisciplinary product development, working with faculty from the College of Engineering and the College of Business’s Department of Marketing. In 2005, Design Intelligence chose him as one of the 40 most admired industrial design faculties in the US.
Minimising the impact of emergency events on workers
Minimising pressure on workers during a medical, evacuation or lockdown emergency is crucial for...
Real-time monitoring: the key to navigating WHS standards
With increased regulatory oversight of Australian workplaces, real-time monitoring and AI-powered...
The lowdown on workplace hearing loss
One in three Australians give little thought to protecting their own hearing in noisy...
