Polymaster Enclosed IBC Bund

Click2Contact

The Polymaster Enclosed IBC Bund addresses concerns and issues with storing and handling chemicals in IBCs. Up until now, there has been a limited range of free-standing, all-weather units that can encase an IBC and at the same time provide safe and clean dispensing options.

In the event of an IBC rupture, the unit would contain the entire contents within itself, preventing any chemical entering stormwater or the surrounding area, as the design exceeds AS3780-2008, The Storage and Handling of Corrosive Substances, bunding requirements of 110%.

Operators have free and easy access via outward swing doors. Each door has clear viewing panels so that an operator can see inside without putting themselves at risk in the event of a spill. The unique door design acts as a splash guard, ensuring no chemicals can exit the unit.

The wide-opening doors allow an IBC to be easily forklifted into position from either side or rear. Extra clearance on all sides of the opening is advantageous to outside storage where forklifts may be operating on uneven ground.

The Enclosed IBC Bund includes a built-in vent to expel gases and a 250 L day tank for continuous dosing if incorporated into an inline process.

The day tank has safe, quick connect/disconnect hoses to minimise spillage/splashing and a sight tube for the operator. A mounted audible and visual low-level alarm can be viewed through viewing panels.

The front cabinet can either accommodate a fully customised dosing system or an off-the-shelf dispensing kit suggested by Polymaster that suits chemicals.

Link for above image: https://bit.ly/3wI3ZEC