NHP safety switch protection range

Under new Workplace Health and Safety regulations, all workplaces are now required to provide RCD/safety switch protection to socket outlets up to 20 A (previously it was only required if a circuit was being upgraded or modified).

NHP is able to assist with such protection using its range from single-phase through to three-phase earth protection. The range also includes units for retrofit so that a regular circuit breaker can be removed and replaced with an RCBO without the requirement for further switchboard modification.

The NHP MOD6 M6RCBD range is suitable for retrofitting in typical insulated load centres and the NHP DIN-SAFE DSRCBH range is suitable for use in a commercial/industrial metal type switchboard as both of these are the same width as regular MCBs for single-phase applications. There is also a three-phase solution in the DIN-Safe range.

If the switchboard requiring protection is a little older, NHP also has an SRCB range to replace the larger, older black NEMA-style circuit breakers which enable a simple replacement. This range also includes an adaptor to suit older Email, Heinemann, Cutler-hammer switchboards.