Pilz PSENslock safety gate switch and interlock
09 June, 2009 | Pilz Australia Industrial Automation LP
Pilz has introduced a gate switch with an interlock with a non-contact transponder for the switching function and an electromagnet to hold the gate closed.
Safety analysis software
09 June, 2009 | B-Safe Australia
JSAfe is portable software application that helps users to create and manage job safety analyses (JSAs) across a large corporate network or at a single job site.
Safety controller configurator tool
09 June, 2009 | Pilz Australia Industrial Automation LP
The configurator tool for the Pilz PNOZmulti modular safety controller has been upgraded to Version 6.0.0, providing a number of enhancements and new features over the preceding Version 5.3.0.
Modular vehicle lights
09 June, 2009 | Vision Safe
The Acot500 Assassin mine vehicle light bar is IP66 rated and designed for the harsh terrain and conditions found on mine sites.
Gas cylinder lockers
09 June, 2009 | PBA Safety
The No Rust system provides a solution for safely securing LPG and compressed gas cylinders.
Emergency kit
09 June, 2009 | Extreme Safety
Designed in conjunction with the Department of Emergency Services in Queensland, the Disaster Supply Kit is designed to contain everything an average small workplace needs in the event of an emergency where power and water may be cut off.
Endoscopic video inspection
09 June, 2009 | Deep Scenes Ltd
The Titan Video stick is a 3 m expandable arm connected to a full-colour video camera which relays remote images to a 5” colour monitor. A video ‘out’ port allows for recording of the video or viewing on a secondary monitor.
Welding voltage reducer
09 June, 2009 | Wesgard International Pty Ltd
The WES400AC-DC welding voltage reducer is a low-voltage safety device designed to operate on any constant current welding machine (stick welder) with an open-circuit voltage of 45-100 V, maintaining the output voltage under 12 V until the arc is struck, thereby preventing the operator from receiving an electric shock.
Safety tools
09 June, 2009 | R.A Venn Pty Ltd
The EgaMaster 1000 V insulated tools are tested to 10,000 V and tested for heat resistance, adhesion, penetration and impact, making them suitable for a wide range of trades and applications.
Safety goggles
09 June, 2009 | Shamir Lens
The G-Force series safety goggles are available in two models.
Chainmesh PPE
09 June, 2009 | Honeywell Industrial Safety
The Sperian Protection chainmesh range includes gloves, aprons and tunics made from high-quality stainless steel to strict ISO 9002 safety standards.
Optoelectronic safety barrier
09 June, 2009 | Treotham Automation Pty Ltd
Designed for the protection of workers exposed to risks arising from the use of dangerous machines, the Admiral AX light curtain, with its two safe static outputs, has seven types of protection and can work without external control units with all the safety functions integrated inside the emitter and the receiver.
Risk management solution
09 June, 2009 | Risk Management & Safety Systems Pty Ltd
The latest version of risk management software RMSS Suite incorporates four modules: Riskmanager, Compliancemanager, Incidentmanager and Claimsmanager.
Intrinsically safe power supply
09 June, 2009 | Endress+Hauser Australia Pty Ltd
The RN221N combined active barrier and power supply is SIL2 rated and provides galvanic isolation for the 4 to 20 mA measured signal. It is suitable for use in hazardous areas and can be powered by 20 to 250 VAC/DC, reducing the need for different versions across the plant.
Fall arrest bolt tester
09 June, 2009 | TechRentals
The Hilti Tester 4 is an inspection system to test safety bolts and fall arrest bolts on building exteriors. These bolts need to be tested when installed and every year after in order to comply with OHS requirements outlined in building regulations and Australian Standards AS 189.4-2000 and AS 4488.201997.
